Vocalist Live Harmony Owner's Manual download pdf (Page 12)

VL Pro Owner’s Manual

Rear Panel

1. AC Power Jack: Standard IEC power cord input, to supply the Mains AC input.. This AC input jack also contains

the fuse that the unit is currently using in addition to a spare fuse.

2. USB Port: This port is USB 1.1 full-speed (12Mbits/second) and carries MIDI control information to the Vocalist®

Live Pro from a personal computer. The Vocalist Live Pro uses the USB port to interface to a computer running

the Vocalist Live Pro Utilities software used to provide preset backup and restore functionality with the Preset

Librarian. The Vocalist Live Pro Utilities software and documentation can be downloaded from www.digitech.com.

3. Footswitch: This TRS 1/4” jack connects the optional DigiTech® FS3X or GNXFC 3-button footswitch to allow

hands-free control of many of the Vocalist Live Pro’s functions. Each of the 3 buttons on the optional footswitch

can be mapped to one of the following functions: Preset Up, Preset Down, Tuner, Tap Tempo, Harmony Toggle,

Harmony Momentary, Lead FX, Toggle, Lead FX Momentary, Reverb/Delay Toggle, Reverb/Delay Momentary,

Harmony/Lead FX Toggle, Harmony/Lead FX Momentary, Harmony/Reverb/Delay Toggle, Harmony/Reverb/Delay

Momentary, Lead FX/Reverb/Delay Toggle, Lead FX/Reverb/Delay Momentary, Harmony/Lead FX/Reverb/Delay

Toggle and Harmony/Lead FX/Reverb/Delay Momentary.

4. Expression Pedal: This input accepts a TS or TRS expression pedal for controlling real-time parameters. Many

elements on the Vocalist Live Pro can be controlled in real-time using the expression pedal.

5. S/PDIF Out: The S/PDIF output echoes the MAIN outputs signal in digital S/PDIF format.

6. MIDI In: This 5-pin female DIN MIDI In port is used to receive control (CC, MIDI Clock, SysEx Program Change

and Pitch Bend) and note information from an external device.

7. MIDI Thru: This port echoes data received on the MIDI In port and is typically used for daisy-chaining MIDI

devices together.

8. Main Out Left and Right: These balanced XLR outputs carry a mix of the lead and harmony vocals and effects at

line levels in mono or stereo.

9. Outputs Ground Lift: This button activates the Ground Lift for the Main Out, Aux Out and Mic Pass Thru

outputs. This switch lifts Pin 1 of the XLR Main Outputs and Mic Pass Thru Jack and the shield of the TRS ¼” Aux

outputs from all ground references and may help break troublesome ground loops that cause hum in the system,

especially when both XLR and 1/4” outputs are used together.

10. Aux Out Left and Right: These female balanced / unbalanced TRS jacks output the processed mix of the lead and

harmony vocals and effects at line levels in mono or stereo.

11. Line In: This balanced female 1/4” input accepts the line level vocal audio when selected with the Vocal Input Line

Button on the front panel. Note that the front Mic and rear Line Inputs cannot be active simultaneously.

12. Mic Pass Thru: This output provides the dry, unprocessed vocal signal obtained at the front panel Vocal Input.

Rear Panel

         

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

No comments

Vocalist Live Harmony Owner's Manual Page 12